Druck DPI620G Series User Manual

Copyright 2013 Baker Hughes Company.
English–DPI620G Instruction Manual | 77
Measure Pressure – IDOS
• Leak Test
Figure 5-11: Channel Settings
Note: UNITS and UTLILITIES are accessed by the selection of the function through CUSTOM
TASK.
5.5 Measure Pressure – IDOS
Optional item - An IDOS Universal Pressure Module (UPM) uses Intelligent Digital Output Sensor
(IDOS) technology to measure the applied pressure and supply the data to an IDOS instrument.
Before you use an IDOS module, please refer to the user manual (K0378, Druck IDOS UPM).
Note: To attach an IDOS module to the DPI620G calibrator, use an IO620-IDOS-USB adapter.
Figure 5-12: IDOS Universal Pressure Module
5.5.1 IDOS Option Instructions
1. Attach one end of the adapter IO620-IDOS-USB to the IDOS module.
2. Push the type A end of USB cable into the USB socket on the instrument and the type B end
into the adapter (IO620-IDOS-USB).
3. Power on the instrument.

Druck DPI620G Series Specifications

General

Brand	Druck
Model	DPI620G Series
Category	Test Equipment
Language	English