EasyManuals Logo

Druck DPI620G Series User Manual

Druck DPI620G Series
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #208 background imageLoading...
Page #208 background image
Copyright 2013 Baker Hughes Company.
198 | DPI620G Instruction Manual–English
Chapter 13. General Specification
13. General Specification
For a full specification of the Druck DPI620G calibrator and its related accessories (MC620G
module carrier, PM620 or PM620T pressure module and PV62X pressure station), refer to the
relevant product datasheet. The DPI620G is applicable to indoor use with the following
environmental requirements. It is also permitted to use outdoors as a portable instrument if these
environmental requirements are met.
Note: The DPI620G has been assessed to the European IEC 60529 standard as having an
ingress protection rating of IP55. The IP for the DPI620G-IS is IP54. But these are for reliability
purposes and not for safety reasons.
Note: To meet the immunity requirements of annex A of EN 61326-1:2006, when used in an
industrial environment, the unit must be battery powered to guarantee accurate measurements.
Note: The case of the DPI620G is not suitable for prolonged exposure to UV.
Note: * Battery temperature. Long time exposure to temperature extremes can decrease battery
life. For maximum life, do not expose the battery to temperatures outside the range -20°C to
+40°C for long periods. The recommended storage temperature range is -20°C to 25°C.
Note: The DPI620G is not suitable for permanent installation in an outdoor environment.
Item Description
Display LCD: Color display with touchscreen.
Operating Temperature -10 to 50°C (14 to 122°F)
Storage Temperature Device: -2
0 to 70°C (-4 to 158°F)
Battery: -2
0 to 40°C (-4 to 104°F)*
Ingress Protection IP54 (Druck DPI620G-IS). IP55 (Druck DPI620G)
Humidity 0 to 90% relative humidity (RH) non-condensing.
Maximum Altitude 3000m
Shock/Vibration MIL-
P
RF-28800F for class 2 equipment.
Pollution Degree 2
EMC Electromagnetic Compatibility:
EN 61326-
1
:2013
Electrical Safety Electrical: EN 61010:2010
Electrical: EN 62368-1:2014 + A11:2017. (Charger PSU Only).
Pressure Safety Pressure Equipment Directive - Class: Sound Engineering Practice
Approved CE Marked
Battery Power DPI620G/-B. (IO620-
B
ATTERY) Nominal voltage: 3.7V.
Capacity: DPI620G/-B. 4800mAh (Li-Polymer).
Charge temperature*: DPI620G/-B. 0 to 45°C (32 to 113°F). The
ba
ttery will not receive a charge if the temperature goes out of the
limits. Discharge Temperature -10 to 50 degrees C.
Charge/discharge cycles: >500 >70% capacity.
DPI620G-IS (IO620G-IS-BATTERY) Nominal Voltage 3.65V.
Capacity: DPI620G-IS. 4000mAh (Li-Ion).
Charge temperature*: DPI620G-IS. 0 to 40°C (32 to 104°F). The
b
a
ttery will not receive a charge if the temperature goes out of the
limits. Discharge temperature: -10 to 60°C (14 to 140°F).
General Specification

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Druck DPI620G Series and is the answer not in the manual?

Druck DPI620G Series Specifications

General IconGeneral
BrandDruck
ModelDPI620G Series
CategoryTest Equipment
LanguageEnglish

Related product manuals