Copyright 2013 Baker Hughes Company.
English–DPI620G Instruction Manual | 147
Scanning for Devices (DPI620G & DPI620 IS)
10.4 Scanning for Devices (DPI620G & DPI620 IS)
The following steps describe how to look (scan) for FOUNDATION Fieldbus devices through
a FOUNDATION Fieldbus H1 connection:
1. Connect the DPI620G (or DPI620 IS) to the H1 bus. Refer to Section 10.2.
2. Tap the OPEN CONNECTION Icon on the Toolbar to show the device scan screen.
Figure 10-11: Device Scan Screen
3. Tap the SCAN icon.
The scanning progress dialog view opens. Any devices found in the selected range will
a
p
pear in the bus tree window list. All scanned devices are shown as a bold icon with an
associated tag. Previous scan results are indicated in gray.
Figure 10-12: Device Scan View
Note: If necessary, you can select the CANCEL icon to stop the scan immediately. If
canceled the current scan results are kept.
To Next Page
Loading...
Need help?
General
