Copyright 2013 Baker Hughes Company.
12 | DPI620G Instruction Manual–English
Chapter 1. Overview
1.17 Maintenance
The DPI620G instrument has no user-serviceable parts and you must send it to a Druck service
center for repair.
1.17.1 How to clean
Clean the body and display with a lint-free cloth and a weak detergent liquid.
Option Description
SWITCH OFF This starts the full power-down of all types of the DPI620G and is recommended
if the device will not operate for several hours. A full reboot will be necessary
when it is energized again. To de-energize (do a full power down), push and
keep down the power button until the screen goes blank.
GO TO STANDBY This makes the DPI620G go into standby mode to reduce power consumption.
Us
e the standby mode if the instrument is to be off for short periods. (DPI620G
has a fast energize from standby mode).
When energized from standby mode, the device always opens the last screen
sh
own before the standby mode was selected.
CANCEL Cancel the POWERDOWN OPTIONS screen and keep device energized.
CAUTION Do not use solvents or abrasive materials.
To Next Page
Loading...
Need help?
General
