EasyManuals Logo
Home>EMC>Gateway>VNX VG2

EMC VNX VG2 User Manual

EMC VNX VG2
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #273 background imageLoading...
Page #273 background image
FC/FCoE cabling worksheet
273
Setup Worksheets
EMC CONFIDENTIAL
FC/FCoE cabling worksheet
You will need the following information for zoning the FC/FCoE switches. Record
this information when you connect the Fibre Channel cables.
If you are connecting more than one array, make a copy of Table 13 on page 275 for
each array.
Array Type
Symmetrix (DMX, VMAX, or VMAXe)
VNX
First Switch Username or ID (required)_________________________
First Switch Password (if required)_____________________________
First Switch Management IP Address (required)_________________
First Switch VSAN ID (Cisco switch only) ______________________
Second Switch Username or ID (optional) ______________________
Second Switch Password (optional) ____________________________
Second Switch Management Port (optional)_____________________
Second Switch VSAN ID (Cisco switch only)____________________
In Table 12, fill in the numbers of the switch ports you actually connect to the blade
ports. You can optionally fill in the World Wide Names, or you can copy them directly
from the setup script output to a text file.
Note: If you are using the auto-config setup script, the WWNs are automatically collected and
zoned for the switch. You need not record the blade WWNs in Table 12 on page 273, unless you
are prompted to do so.
Table 12 Data Mover Fibre Channel cabling
Port Switch Switch port
Data Mover 2 BE 0 1
st
2
nd
_______________
WWN 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____ : 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____
Data Mover 2 BE 1
1
st
2
nd
_______________
WWN 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____ : 50 : 06 : 01 : 61 : _____ : _____ : _____ : _____
Data Mover 3 BE 0
1
st
2
nd
_______________
WWN 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____ : 50 : 06 : 01 : 68 : _____ : _____ : _____ : _____
Data Mover 3 BE 1 1
st
2
nd
_______________
WWN 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____ : 50 : 06 : 01 : 69 : _____ : _____ : _____ : _____
Data Mover 4 BE 0
1
st
2
nd
_______________
WWN 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____ : 50 : 06 : 01 : 60 : _____ : _____ : _____ : _____
Data Mover 4 BE 1
1
st
2
nd
_______________

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EMC VNX VG2 and is the answer not in the manual?

EMC VNX VG2 Specifications

General IconGeneral
BrandEMC
ModelVNX VG2
CategoryGateway
LanguageEnglish

Related product manuals