EMC VNX VG2/VG8 Gateway Configuration Setup Guide
298
Setup Worksheets
EMC CONFIDENTIAL
ConnectHome configuration worksheet
You will need the following information to configure ConnectHome:
Customer’s Site ID ___________________________________________
Celerra Serial Number: Pre-populated by the system
Enable Dial In:
❑ Yes ❑ No
Number to Dial In ___________________________________________
Enable Encryption:
❑ Yes ❑ No
Select at least one delivery method for system-generated messages:
Email Priority:
❑ Primary ❑ Secondary ❑ Tertiary ❑ Disabled
Primary Email-SMTP: ________________________________________
Secondary Email-SMTP (optional):_____________________________
Subject (default value is CallHome Alert): _______________________
Recipient Address(es):________________________________________
Note: To enter multiple recipient addresses, separate the email addresses with a comma. Do
not include any extra spaces.
FTP Priority: ❑ Primary ❑ Secondary ❑ Tertiary ❑ Disabled
Primary FTP Server: _________________________________________
Primary FTP Server Port: _____________________________________
Primary FTP Server User Name: _______________________________
Primary FTP Server Password: ________________________________
Primary FTP Server Remote Location: _________________________
Primary FTP Server Transfer Mode:
❑ Active ❑ Passive
Secondary FTP Server (optional): ______________________________
Secondary FTP Server Port (optional): __________________________
Secondary FTP Server User Name (optional): ___________________
Secondary FTP Server Password (optional): _____________________
Secondary FTP Server Remote Location (optional): ______________
Secondary FTP Server Transfer Mode:
❑ Active ❑ Passive
Modem Priority:
❑ Primary ❑ Secondary ❑ Tertiary ❑ Disabled
Primary Number to Dial Out: _________________________________
Is this a BT Tymenet Number:
❑ Yes ❑ No
Secondary Number to Dial Out (optional): ______________________
Is this a BT Tymenet Number: ❑ Yes ❑ No