94 •
••
• Vector Chart material
A Permit CD-ROM or floppy disk from the RENC
The RENC can deliver Permits either stored in CD-ROM or stored in floppy disk. When you received new permits
from the RENC you have to load them into the ECDIS. The permit is a key which is used to decrypt the Chart you
want to use in the ECDIS. To load Permits, proceed as follows:
CHART PLAN push button
1. Press CHART PLAN push button.
2. Select Permit Management from the menu.
Press Load File in Permit Management window.
3. Select correct drive from Look in list box
Permits can be available in two formats.
• PERMIT.TXT which contain Permits, their editions and subscription
types. This is the preferred format.
• *.PMT which as received from a RENC contain Permits, but no edition or
subscription information. NOTE! *.PMT format is used by the system for
backup of Permits. As a backup it contain also subscription type and
edition.
Select suitable permit file and press Open button to load Permits.
4. In Permit Management window displays Permits which are loaded into the
ECDIS.
To Next Page
Loading...
Need help?
General
