Route planning •
••
• 227
Waypoint sheet
To select between Params,
AntiGround, Prepare and
WPs sheets to be opened
either press button
or go by cursor above WP,
Params, ChartAlarms or
Parameters text and press
SELECT
Enable changes:
You have to select this in order to enable editing.
Waypoint:
Each waypoint has a number. This shows the current waypoint number. Total indicates first the total number of
waypoints in the current file and then total length of the planned route from first waypoint to the last waypoint.
Name:
You can give name to each waypoints.
Steering mode:
You can define steering mode each leg whether it is rhumb line or great circle.
Radius:
You can define turning radius for each waypoints.
Channel limit:
You can define channel limit for each leg.
Position:
In these fields you can enter LAT/LON position of waypoint.
Speed:
You can set speed limit for minimum and maximum speed.
First:
Pushing this control user gets to first waypoint of the file.
Last:
Pushing this control user gets to last waypoint of the file.
>>:
This changes current waypoint to the next waypoint.
<<:
This changes current waypoint to the previous waypoint.
Insert:
This insert a new waypoint after the current waypoint.
Add:
This function adds a new waypoint to the end of the route.
Delete:
This function deletes current waypoint.
To Next Page
Loading...
Need help?
General
