276 •
••
• Reference targets
Operation of Ref target push button is following:
1. When you press REF TARGET push button, REFERENCE TARGET dialog box will appear
to Dialog box area.
2. If you already have REFERENCE TARGET dialog box on display and you press REF
TARGET push button, you will get Reference target menu on display.
pop-up menu:
Reference target:
It is possible to start or stop reference targets monitoring.
Select:
User can select from list box reference target file.
Cancel:
Cancels selected reference target file.
Create:
User can give name for reference target.
Backup and Restore:
User can make backup copy from reference target file or restore from backup
media.
Report:
User can take tabulated reference target report.
How to select Reference targets
1. Press Reference target push button and select from menu Select. The following list box
appears to Dialog box area:
Reference target list box appears to the dialog box area. Highlight desired Reference target to
select it.
2. Select desired Reference target from list box.
3. Reference target will be loaded to ECDIS processor. For more information to control
Reference target, see Chapter "Details of chart display".
To Next Page
Loading...
Need help?
General
