Reference targets •
••
• 279
How to select Reference target to be modified
In a Record field number of current indicates reference target record which is currently to be modified. You have
three alternatives to select desired reference target record:
• Enter desired number of Reference target record in Record field to Waypoint edit box. To
modify Waypoint's number take cursor to Waypoint edit box and press Select button. Enter
desired number and press OK.
• Use First, <<, >>, Last buttons to find desired Reference target record.
• Use INFO/HELP push button to select Reference target record. Take cursor into the
Electronic chart area above desired symbol of Reference target and press INFO/HELP push
button.
Change Reference target position
To change position of Reference target you have two alternatives to do it:
• Enter latitude and longitude to Position field.
• Drag and drop symbol of reference point with CHART ALIGN push button.
Enter latitude and longitude to Position field:
1. Select desired Reference target record.
2. Enter co-ordinates of latitude and longitude to Position field. To modify co-ordinate of
Latitude take cursor to Lat edit box and press Select button. Enter co-ordinate and press OK.
To the same way to modify co-ordinate of longitude.
Drag and drop symbol of Reference target to new position:
CHART ALIGN pushbutton
1. Take cursor into the Electronic chart area above desired symbol o
Reference target.
2. Press CHART ALING push button and move cursor to desired position.
Keep CHART ALIGN button pressed down while you move cursor and release
it when cursor is in right position.
To Next Page
Loading...
Need help?
General
