Backup Operations •
••
• 293
How to copy a file to an other name
You can change name of file using Rename function in Backup & Restore. To copy a file to another name, proceed
as follows:
1. Select desired file category.
2. Select desired file in Hard Disk -field.
3. Press Rename button.
4. Enter new name for selected file and press OK.
Backup to floppy
You can make a backup from original file to floppy disk in Backup & Restore. To make a backup of file to floppy
disk, proceed as follows:
1. Select desired file category.
2. Select desired file in Hard Disk -field.
3. Select desired Drive in Backup Device -field.
4. Press Backup button in Hard Disk -field.
Restore from floppy
You can restore file from floppy disk in Backup & Restore. To restore file from floppy disk, proceed as follows:
1. Select desired file category.
2. Select desired Drive in Backup Device -field.
3. Select desired file in Backup Device -field.
4. Press Restore button in Backup Device -field.
How to delete file
You can delete file using Delete function in Backup & Restore. To delete a file, proceed as follows:
1. Select desired file category.
2. Select desired file in Hard Disk -field.
3. Press Delete button.
Move to planning or navigation station
If there is separate planning station connected to system, it is possible to move files from planning station to
navigation station and vice versa.
1. From Control Panel select desired pushbutton.
2. From menu select Backup and Restore command.
3. In the Hard disk -field select desired file.
4. Select backup drive in Backup device -field. Press Backup button in Hard Disk -field. If
Overwrite existing files is selected the file with the same name in another ECDIS is replaced
with moved file.
To Next Page
Loading...
Need help?
General
