Ricoh M281 Series User Manual

Main Machine Installation
SM 2-5 D255/D256/M281/M282
Installation
2.2 MAIN MACHINE INSTALLATION
2.2.1 INSTALLATION FLOWCHART
(For MP 501/601 only)
 Do not enter SP Mode when supplying toner after turning ON the machine at
installation.
 If you enter and exit SP mode during toner supply, e.g. to skip the Program/Change
Administrator screen, toner supply stops and “Add toner” indication may appear.
 If “Add toner” indication appears, open and close the Front Cover of the machine. The
toner supply will start.
2.2.2 ACCESSORY CHECK
MP 501/601
Check the quantity and condition of these accessories.
See IMPORTANT and
NOTE below.
⇒
Rev. 08/12/2016

Ricoh M281 Series Specifications

General

Brand	Ricoh
Model	M281 Series
Category	Copier
Language	English