Energy Save
D255/D256/M281/M282 7-32 SM
7.13 ENERGY SAVE
7.13.1 ENERGY SAVER MODES
Customers should use energy saver modes properly, to save energy and protect the environment.
The area shaded grey in this diagram represents the amount of energy that is saved when the
timers are at the default settings. If the timers are changed, then the energy saved will be different.
For example, if the timers are all set to 240 min., the grey area will disappear, and no energy is
saved before 240 min. expires.
Timer Settings
The user can set these timers in the following menu.
 MP 501/601: User Tools > System settings > Timer Settings
 SP 5300/5310: System > Low Power Mode Timer
Auto off timer (1 – 240 min): Off/Sleep Mode. Default setting: 1 min.
Return to Stand-by Mode
Recovery time from off/sleep mode: 10 sec.
Warm-up time:
 MP 501: 24 sec.(NA/AP), 60 sec.(EU)
 MP 601: 25.4 sec.(NA/AP), 60 sec.(EU)
 SP 5300: 21 sec.
 SP 5310: 25.4 sec.
To Next Page
Loading...
Need help?
General