Ricoh M281 Series User Manual

Address Book Upload/Download
D255/D256/M281/M282 5-56 SM
5.8.2 DOWNLOAD
1. Prepare a formatted SD card.
2. Make sure that the write-protection on the SD card is off.
3. Turn OFF the main power.
4. Remove the controller cover. (MP 501/601: page 4-45, SP 5300/5310: page 4-67)
5. Insert the SD card into SD Card Slot 2 (lower) [A].
MP 501/601
SP 5300/5310
6. Turn ON the main power.
7. Enter the SP mode.
8. Execute SP5-846-051 (Backup All Addr Book).
9. Exit the SP mode, and then turn OFF the main power.
10. Remove the SD card form the SD Card Slot 2 (lower).
11. Reassemble the machine.
 If the capacity of SD card is not enough to store the local user information, an error
message is displayed.
 Carefully handle the SD card, which contains user information. Do not take it back to your
location.

Ricoh M281 Series Specifications

General

Brand	Ricoh
Model	M281 Series
Category	Copier
Language	English