Caster Table Type M24 (D3C7-01)
SM 2-21 D255/D256/M281/M282
2.3.2 INSTALLATION PROCEDURE
For instructions on unpacking and installing the Caster Table Type M24, please refer to the
operating instructions "About This Machine" for MP 501/601, or "Operating Instructions" for SP
5300/5310.
When installing with the paper feed unit
Installation by service representative may be required when installing Caster Table Type M24 with
Paper Feed Unit PB1100, depending on the machine configuration.
Machine
Configuration
MP 501/601 SP 5300/5310
Printer only
With 1 to 4 PFU
PB1100
Printer only, or
with 1 PFU
PB1100
With 2 to 4 PFU
PB1100
Who can install
the caster table
End user
Service
representative
*1
End user
Service
representative
*1
*1 The attaching stands and connecting parts need to be installed to prevent the machine from
falling over. If it falls or topples over, an injury might occur. For instructions on installing Paper
Feed Unit PB1100 and Caster Table Type M24, please refer to page 2-23 "Installation Procedure".