www.trilithic.com
Page II-59
180 DSP Operation Manual
Signal Level Meter
Save an Open Channel Plan
After editing an open channel plan, you
must save your changes.
Perform the following steps to save the
channel plan:
1. Select the File softkey.
2. From the File pop-up menu, select
the Save button as shown in the
image to the right.
3. The channel plan will be saved to
the internal memory of the 180 DSP.
Save an Open Channel Plan with a New Name
After editing an open channel plan, you can save the channel plan with a new name. This
function is useful for duplicating an existing channel plan
Perform the following steps to save the channel plan with a new name:
1. Select the File softkey.
2. From the File pop-up menu, select
the Save As button as shown in
the image to the right.
3. Use the Virtual Keyboard to enter
the new name for the channel plan
as shown in the image to the right.
4. The new channel plan will be
saved to the internal memory of the
180 DSP.
To Next Page
Loading...
Need help?
General
