Trilithic 180 DSP User Manual

www.trilithic.com
Page IV-132
180 DSP Operation Manual
Signal Level Meter
Setting the Number of Packets
To manually enter the number of
packets for the ping test, highlight the
Number of Packets eld as shown
in the image to the right and then use
either of the following methods to
change the packet number:
• Use the up/down arrow buttons
to adjust the number in 1
packet increments.
• Press the Enter button and
use the Virtual Keyboard to
directly enter the number of
packets as shown in the image
to the right.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English