Trilithic 180 DSP User Manual

www.trilithic.com
Page I-25
180 DSP Operation Manual
Signal Level Meter
Shutdown
Shutdown allows the 180 DSP to be turned off at the end of the work day to conserve
power.
Automatic Shutdown
The 180 DSP will automatically enable the automatic shutdown mode to conserve
power after the 180 DSP has been idle for a specied period of time.
The default setting for the turn off delay is 1 Hour. The turn off delay can be set from a
minimum of one (1) hour up to a maximum of 24 hours.
Manual Shutdown
Press and hold the Power button to
shutdown the 180 DSP. A notication
window will be displayed, select the
OK button to shutdown or select the
Cancel button to exit without shutting
down the device.
For more information about setting the Turn Off Delay, see
Section II: Setup, Chapter 3: Meter Conguration, Interface
Settings.
Whenever the 180 DSP is being powered by the AC to DC
power adapter & battery charger, the turn off delay will be
deactivated automatically.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English