Trilithic 180 DSP User Manual

www.trilithic.com
Page II-60
180 DSP Operation Manual
Signal Level Meter
Limit Set Management
Select the Limit Set button as shown in the
image to the right to manage limit sets on the
180 DSP.
The Limit Set screen will be displayed as
shown in the image to the right. This screen
allows you to:
• Open, create, save and delete limit
sets
• Edit measurement limits
From within the Limit Set screen, use the arrow buttons on the keypad to navigate through the
list of channels.
These parameters can be set directly from your instrument
or using the ViewPoint WFM Module. For instructions
regarding setup using ViewPoint, please refer to the ViewPoint
Operation Manual.
Channel Plans and Limit Sets created/modied on the 180
DSP can only be used in the Troubleshooting menu. Autotests
require ViewPoint WFM Module Channel Plans and Limit Sets.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English