Trilithic 180 DSP User Manual

www.trilithic.com
Page IV-104
180 DSP Operation Manual
Signal Level Meter
Probe Loss
Highlight the Probe eld and then
use either of the following methods
to change the loss value:
• Use the up/down arrow
buttons to change the
probe loss level in 1 dB
increments.
When nished entering the test
point loss information, press the
Back button to return to the Return
Spectrum screen.
The total test point compensation
value will be displayed, as shown in
the image to the right.
• Press the Enter button and
use the Virtual Keyboard to
directly enter the loss value
as shown in the image to the
right.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English