Trilithic 180 DSP User Manual

www.trilithic.com
Page IV-121
180 DSP Operation Manual
Signal Level Meter
Probe Loss
Highlight the Probe eld and then
use either of the following methods
to change the loss value:
• Use the up/down arrow
buttons to change the
probe loss level in 1 dB
increments.
• Press the Enter button and
use the Virtual Keyboard
to directly enter the loss
value as shown in the
image to the right.
When nished entering the test
point loss information, press the
Back button to return to the Full
Spectrum screen.
The total test point compensation
value will be displayed, as shown
in the image to the right.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English