Trilithic 180 DSP User Manual

www.trilithic.com
Page I-37
180 DSP Operation Manual
Signal Level Meter
Connection Indicators
Once connected, the Network Manager window will automatically display the MAC, IP,
Subnet, Gateway, and DNS of the active connection.
Within the Network Manager window, each connection button is labeled with the
connection name and status as follows:
Active – This symbol indicates the connection is currently active.
Inactive – This symbol indicates the connection is currently inactive.
From any navigation menu, the active connections are shown in the right side of the Status
Bar as follows:
Ethernet – This symbol indicates the Ethernet connection is currently active.
Bluetooth – This symbol indicates the Bluetooth connection is currently active.
Disconnect a Network Connection
To disconnect an active network
connection, select any connection button
with an active status.
The Continue window will appear
as shown in the image to the right.
Select the OK button to disconnect or
select the Cancel button to exit without
disconnecting.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English