Trilithic 180 DSP User Manual

www.trilithic.com
Page II-80
180 DSP Operation Manual
Signal Level Meter
Database Backup
Backup to Internal Memory
Perform the following steps to backup the 180 DSP database le to the internal memory of
the 180 DSP:
1. Select the Database softkey.
2. From the Database pop-up menu,
select the Backup button as shown
in the image to the right.
3. The Status Bar will indicate a
successful backup to the internal
memory by displaying the text
“-> /tmp/main.db” as shown in the
image below.
This internal memory is lost on power down and is only used
to clone users on the meter by backing up the database of
one user and restoring the database to another user.
This function is useful when cloning the device settings
between users on the same meter. When importing the
database le under another user, all device settings will be
updated while retaining the existing user information.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English