Trilithic 180 DSP User Manual

www.trilithic.com
Page II-84
180 DSP Operation Manual
Signal Level Meter
Cloning Meter Settings to a New Meter
Perform the following steps to clone all les from one 180 DSP to another:
1. Insert a USB ash drive into the USB port of the meter to clone.
2. Press the Function button and select
the Activate USB Power function as
shown in the image to the right.
3. The power to the USB ash drive
is activated and the drive is now
mounted to the le system as shown in
the image to the right. The 180 DSP is
now capable of transferring les to and
from the USB ash drive.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English