Trilithic 180 DSP User Manual

www.trilithic.com
Page II-81
180 DSP Operation Manual
Signal Level Meter
Backup to USB Flash Drive
Perform the following steps to backup the 180 DSP database le to a USB Flash Drive:
1. Insert a USB ash drive into the
USB Port of the 180 DSP.
2. Press the Function button and
select the Activate USB Power
function as shown in the image to
the right.
3. The power to the USB ash drive
is activated and the drive is now
mounted to the le system as
shown in the image to the right.
The 180 DSP is now capable of
transferring les to and from the
USB ash drive.
4. Select the Database softkey.
5. From the Database pop-up menu,
select the Backup button as shown
in the image to the right.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English