Trilithic 180 DSP User Manual

www.trilithic.com
Page II-103
180 DSP Operation Manual
Signal Level Meter
Disable Touchscreen
Perform the following steps to disable the 180 DSP touchscreen:
1. Select the Disable softkey.
2. The Disable Touch Screen window
will be displayed as shown below.
3. Select the Yes button to disable the
touchscreen or select the No button to
exit without disabling the touchscreen.
4. To enable the touchscreen, perform
the touchscreen calibration as
described in the following section.
This function can be used to disable a touchscreen that is
operating improperly or has been damaged. This allows
continued operation of the 180 DSP using the keypad.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English