www.trilithic.com
Page III-10
180 DSP Operation Manual
Signal Level Meter
Create a New Job
From the Job Management screen, select
the New softkey to create a new job.
The Virtual Keyboard will be displayed as shown in the image below (left). Use the Virtual
Keyboard to enter the name of the new job. The new job will be displayed in the Job
Management screen as shown in the image below (right). If you don’t enter a name for the
job, the default job name will follow the format “wYYYYMMDDHHMMSS”.
The Continue window will be displayed as
shown in the image to the right. Select the
OK button to create a new job or select the
Cancel button to exit without creating a new
job.
By default, the Channel Plan eld will be populated with the last used channel plan provided
that it still exists on the instrument.
To Next Page
Loading...
Need help?
General
