Trilithic 180 DSP User Manual

www.trilithic.com
Page II-18
180 DSP Operation Manual
Signal Level Meter
Current Date/Time
The Current Date/Time setting is used to
set the current date and time for the 180
DSP. This information is displayed in the
Title Bar of any navigation screen and is
added to every data log, measurement,
job, and autotest.
Press the Enter button and the Virtual
Keyboard will be displayed as shown in
the image to the right.
Use the Virtual Keyboard to enter the
current date in the mm/dd/yyyy format.
Select the Done softkey and the Virtual
Keyboard will be displayed as shown in
the image to the right.
Use the Virtual Keyboard to enter the
current time in the hh:mm:ss format.
Select the Done softkey again to save the
current date and time or Press the Back
button at any time to exit without saving
the changes.

Trilithic 180 DSP Specifications

General

Brand	Trilithic
Model	180 DSP
Category	Measuring Instruments
Language	English