8-68 WorkCentre C2424 Service Manual
NVRAM Replacement
(PL 5.9)
1. Remove the back cover from the Electronics Module.
Caution
Some semiconductor components, such as the NVRAM chip, are vulnerable
to damage by Electrostatic Discharge (ESD). Review the “Electrostatic
Discharge (ESD) Precautions” on page vii before continuing with this
procedure.
Note
Observe the orientation of the NVRAM chip before removing it and use this
as a guide for proper replacement.
2. Remove the old NVRAM from its socket in the Electronics Module (page 1-4).
3. Insert the new NVRAM chip into the socket. Ensure that the notch on the chip is
on the left side.
4. After powering ON the system, either download the snippet titled “setsn.ps” from
infoSMART or get it from the Product Training CD-ROM.
5. Edit the snippet to include the printer serial number, using a text editor.
6. Download the edited file to the printer using an FTP program.
To Next Page
Loading...
Need help?
General