Digi AnywhereUSB Plus User Manual

System administration Review device status
AnywhereUSB® Plus User Guide
404
Review device status
You can review the system of your device from either the Status page of the Web interface, or from
the command line:
ÉWebUI
To display system information:
1. Log into the AnywhereUSB Plus WebUI as a user with Admin access.
2. On the main menu, click Status.
A secondary menu appears, along with a status panel.
3. On the secondary menu, click to display the details panel for the status you want to view.
Command line
To display system information, use the show system command.
n
Show basic system information:
1. Log into the AnywhereUSB Plus command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
2. Enter show system at the prompt:
> show system
Model : Digi AnywhereUSB Plus
Serial Number : AnywhereUSB Plus-000065
SKU : AnywhereUSB Plus
Hostname : AnywhereUSB Plus
MAC Address : DF:DD:E2:AE:21:18
Hardware Version : 50001947-01 1P
Firmware Version : 21.8.24.120
Alt. Firmware Version : 21.8.24.120
Alt. Firmware Build Date : Mon, 13 September 2021 8:04:23
Bootloader Version : 19.7.23.0-15f936e0ed
Current Time : Mon, 13 September 2021 8:04:23 +0000
CPU : 1.4%
Uptime : 6 days, 6 hours, 21 minutes, 57 seconds
(541317s)
Temperature : 40C
>

Digi AnywhereUSB Plus Specifications

General

Brand	Digi
Model	AnywhereUSB Plus
Category	Switch
Language	English