System administration Configuration files
AnywhereUSB® Plus User Guide
426
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Save configuration to a file
You can save your AnywhereUSB Plus device's configuration to a file and use this file to restore the
configuration, either to the same device or to similar devices.
ÉWebUI
This procedure creates a binary archive file containing the device's configuration, certificates and
keys, and other information.
1. Log into the AnywhereUSB Plus WebUI as a user with Admin access.
2. On the main menu, click System. Under Configuration, click Configuration Maintenance.
The Configuration Maintenance windows is displayed.
3. In the Configuration backup section:
a. (Optional) To encrypt the configuration using a passphrase, for Passphrase
(save/restore), enter the passphrase.
b. Click SAVE.
The file will be downloaded using your browser's standard download process.
Command line
1. Log into the AnywhereUSB Plus command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enter the following:
> system backup path [passphrase passphrase] type type
To Next Page
Loading...
Need help?
General