Manage the Hubs using the AnywhereUSB Manager Disconnect from a group or USB device
AnywhereUSB® Plus User Guide
52
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. For Password, enter the new password. The password must be at least eight characters long
and must contain at least one uppercase letter, one lowercase letter, one number, and one
special character.
4. Click Apply to save the configuration and apply the change.
For more detailed information about this process, see Change the default password for the admin
user.
Disconnect from a group or USB device
You can disconnect from any group or USBdevice in the group to which you no longer need access.
n
Disconnect from a group
n
Disconnect from a USB device
Disconnect from a group
You can disconnect from a group that has ports you no longer need access to. You are disconnected
from all USB devices and ports in that group. Any other user can then connect to that group.
Note If you have auto connect enabled for the group, you are not allowed to disconnect from the
group. You have to first disable auto connect, and then disconnect from the group. The next time you
log in to your computer, you will not be automatically connected to this group.
To Next Page
Loading...
Need help?
General