Manage the Hubs using the AnywhereUSB Manager View latency graph
AnywhereUSB® Plus User Guide
62
6. An update message displays in the Manage Hub Credentials dialog.
7. Click Close.
Remove a Hub certificate
You can choose to remove a Hub to which you no longer want the AnyhwereUSB Manager to
connect.
After you have removed a Hub certificate, if you have the Auto-register Hub Cert option selected in the
Preferences dialog, a new certificate for the Hub is automatically registered with the AnyhwereUSB
Manager at the next connection attempt or the next time the Hub is discovered by the Manager. If this
option is not selected and you want the AnywhereUSBManager to connect to the Hub, you can
manually add the Hub to register a new certificate.
1. Open AnywhereUSB Manager.
2. Choose Configure > Manage Hub Credentials. The Manage Hub Credentials dialog appears.
3. Select the Hub that you want to remove.
4. Click Remove.
5. Click Close.
Add a Hub certificate
You can manually add a Hub, which registers the Hub's certificate with the AnywhereUSBManager.
1. Open AnywhereUSB Manager.
2. Choose Configure > Manage Hub Credentials. The Manage Hub Credentials dialog appears.
3. In the Serial number field, enter the Hub's serial number.
4. Click Add. The Choose a credential file window appears.
5. Browse for the new certificate file and click Open. The file should have a .pem extension.
6. An update message displays in the Manage Hub Credentials dialog.
7. Click Close.
View latency graph
You can review the relative latency of all of the Hubs connected to the network.
Note TheLatency Graphmenu item is not available when theAnywhereUSB Manageris installed in
service mode.
1. Open the AnywhereUSB Manager.
2. Select Help > Latency graph to display the latency graph.
To Next Page
Loading...
Need help?
General