Virtual Private Networks (VPN) L2TPv3
AnywhereUSB® Plus User Guide
665
Status : up
Home Agent : 4.3.2.1
Care of Address : 10.10.10.1
Interface : modem
GREîŻTunnel : 10.10.10.1 === 4.3.2.1
Metric : 255
MTU : 1476
Lifetime (Actual) : 600
Local Network Subnet Status
------------- -------------- ----------
lan1 192.168.2.1/24 Advertized
LAN2 192.168.3.1/24 Advertized
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
L2TPv3
Your AnywhereUSB Plus device supports Layer 2 Tunnelling Protocol Version 3 (L2TPv3) static
unmanaged Ethernet tunnels.
Configure an L2TPv3 tunnel
Your AnywhereUSB Plus device supports Layer 2 Tunnelling Protocol Version 3 (L2TPv3) static
unmanaged Ethernet tunnels.
Required configuration items
n
Aname for the L2TPv3 tunnel.
n
Enable the tunnel.
n
The remote endpoint IP address.
n
The local endpoint IP address.
n
The session ID.
n
The peer session ID.
Additional configuration items
n
Encapsulation type. If UDP is selected:
l
The IDfor the tunnel.
l
The IDof the peer's tunnel.
l
Determine whether to enable UDP checksum.
n
The session cookie.
n
The peer session cookie.
To Next Page
Loading...
Need help?
General