Configure the AnywhereUSB in the web user interface AnywhereUSBConfiguration page
AnywhereUSB® Plus User Guide
93
AnywhereUSBConfiguration page
The AnywhereUSB Configuration page consists of all configuration options related to AnywhereUSB.
To access this page, open the web UIand click System > Configuration >AnywhereUSB
Configuration.
Service Settings
Click Service Settings to expand this section.
Item Description
Enable Click Enable to enable AnywhereUSB.
Port
Specify the port number that is used to access the Hub. The default
value is 18574. If you change the port number you must also change
the corresponding port number on your computer.
Enable USBdebug logging Select this option to enable USB debug logging. This feature should
only be used when working with Digi Technical Support to debug an
issue.
Group Settings
Click Group Settings to expand this section. In this section you can name groups and assign USB
ports to the groups.
For instructions, see Create groups and assign ports to the group.
Item Description
Group Description A free-form description of a group. You can type over the default
description.
One row displays for each group, and up to 24 groups are available.
The Unassigned group row is used for any port that is not assigned
to a group.
Port Assignments Specify the USB ports in each group. Each port on a Hub can be
assigned to only one group. Ports that are not assigned to a group
can be put in the Unassigned group.
Depending on your model, 2, 8, or 24 group rows are available.
Client Connections
Click Client Connections to expand this section and display information about the clients that can
connect to the Hub.
For more information, see Configure and manage client IDs.
To Next Page
Loading...
Need help?
General