Central management Configure multiple devices using profiles
AnywhereUSB® Plus User Guide
466
2. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
To view the status of your device's connection to Remote Manager, use the show cloud command at
the command line:
Command line
> show cloud
Device Cloud Status
-------------------
Status : Connected
Server : my.devicecloud.com
Device ID : 00000000-00000000-0040FFFF-FF0F4594
>
The Device ID is the unique identifier for the device, as used by the Remote Manager.
Configure multiple devices using profiles
Digi recommends you take advantage of Digi Remote Manager profiles to manage multiple
AnywhereUSB Plus routers. Typically, if you want to provision multiple AnywhereUSB Plus routers:
1. Using the AnywhereUSB Plus local WebUI, configure one AnywhereUSB Plus router to use as
the model configuration for all subsequent AnywhereUSB Pluss you need to manage.
2. Register the configured AnywhereUSB Plus device in your Digi Remote Manager account.
3. In Digi Remote Manager, create a profile based on the configured AnywhereUSB Plus.
4. Apply the profile to the AnywhereUSB Plus devices you need to configure.
Digi Remote Manager provides multiple methods for applying profiles to registered devices. You can
also include site-specific settings with a profile to override settings on a device-by-device basis.
Learn more
n
For information on using Digi Remote Manager to configure and manage AnywhereUSB Plus
routers, see the Digi Remote Manager User Guide.
n
For information on using Digi Remote Manager APIs to develop custom applications, see the
Digi Remote Manager Programmer Guide.
To Next Page
Loading...
Need help?
General