Electromagnetic compatibility
2026419-033E CIC Pro™ A-5
Recommended separation distances
The following table provides the recommended separation distances (in meters)
between portable and mobile RF communications equipment and the CIC Pro center.
The CIC Pro center is intended for use in the electromagnetic environment on which
radiated RF disturbances are controlled. The customer or the user of the CIC Pro
center can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications equipment (transmitters)
and the CIC Pro center as recommended below, according to the maximum output
power of the communications equipment.
For transmitters rated at a maximum output power not listed above, the recommended
separation distance [d] in meters (m) can be estimated using the equitation applicable
to the frequency of the transmitter, where P is the maximum output power rating of
the transmitter in watts (W) according to the transmitter manufacturer.
NOTE
These guidelines may not apply in all instances. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
Separation distance in meters (m) according to frequency of transmitter
Rated maximum output
power of transmitter in watts
150 kHz to 80 MHz
a
d = 1.2
80 MHz to 800 MHz
a
d = 1.2
800 MHz to 2.5 GHz
a
d = 2.3
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
a
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
To Next Page
Loading...
Need help?
General
