GE MP100 Series User Manual

Installation
2026419-033E CIC Pro™ 5-11
Mount the equipment
Desktop (MP100D) mounting options
The CIC Pro center desktop unit may be physically mounted using one of the
following strategies:
 Placed horizontally on a desktop, under the monitor stand/base.
 Physically mounted to a wall or the bottom side of a desk or shelf using the
supplied mounting bracket. When using this method, attach the bracket to the
desktop unit using the four mounting screws.
 Placed vertically on a desktop or floor, using the optionally orderable foot stand.
Rack-mounted (MP100R) mounting options
The CIC Pro center rack-mounted unit may be physically mounted using one of the
following strategies:
 Placed horizontally on a desktop, under the monitor stand/base.
 Physically mounted in a server rack.
 Physically mounted to a rack using the supplied mounting bracket. When using
this method, attach the bracket to the rack using the four mounting screws.
Restrictions
CAUTION
PERFORMANCE ISSUES/DATA LOSS—Failure to adhere to the
following restrictions may cause CIC Pro center performance issues
and data loss.
The following restrictions apply to the mounting options listed above:
 USB ports support passive extenders up to a total of 15 feet (per USB 2.0
standards) and does not support active extenders. The standard keyboard is
supplied with a 6-foot cable, so only an additional 9-foot USB passive extender
can be used.
 GE does not carry in service stock any USB extenders.
 No extenders are supported for the speaker.
 The part numbers for the supported digital video cables are listed in Accessories
on page 9-6.

GE MP100 Series Specifications

General

Brand	GE
Model	MP100 Series
Category	Medical Equipment
Language	English