GW Instek MFG-2000 Series User Manual

MFG-2000 Series User Manual
178
The SYNC signal is output from the TRIG output
terminal.
Sweep Mode
Sweep mode is used to select between linear or logarithmic
sweeping. Linear sweeping is the default setting.
Panel Operation
1. Press the SWEEP key.

2. Press F2 (Type).


3. To select linear or logarithmic
sweep, press F1 (Linear) or F2
(Log).
a

~
g

4. Press Return to return to the
previous menu.


GW Instek MFG-2000 Series Specifications

General

Brand	GW Instek
Model	MFG-2000 Series
Category	Inverter
Language	English