GW Instek MFG-2000 Series User Manual

REMOTE INTERFACE
339
SOURce[1|2|3]:BURSt:STATe
Source Specific
Command
Description
Turns burst mode on or off. By default burst mode
is turned off.
Note
When burst mode is turned on, sweep and any
modulation modes are disabled.
Syntax
SOURce[1|2|3]:BURSt:STATe {OFF|ON}
Example
SOUR1:BURS:STAT ON
Turns burst mode on.
Query Syntax
SOURce[1|2|3]:BURSt:STATe?
Return Parameter
0
Disabled
1
Enabled
Example
SOUR1:BURS:STAT?
0
Burst mode is off.
SOURce[1|2|3]:BURSt:MODE
Source Specific
Command
Description
Sets or queries the burst mode as gated or
triggered. The default burst mode is triggered.
Note
The burst count, period, trigger source and any
manual trigger commands are ignored in gated
burst mode.
Syntax
SOURce[1|2|3]:BURSt:MODE {TRIGgered|GATed}
Example
SOUR1:BURS:MODE TRIG
Sets the burst mode to triggered.
Query Syntax
SOURce[1|2|3]:BURSt:MODE?
Return Parameter
TRIG
Triggered mode
GAT
Gated mode

GW Instek MFG-2000 Series Specifications

General

Brand	GW Instek
Model	MFG-2000 Series
Category	Inverter
Language	English