GW Instek MFG-2000 Series User Manual

MODULATION
187
Burst Period
The burst period is used to determine the time between the start of
one burst and the start of the next burst. It is only used for internally
triggered bursts.
Panel Operation
1. Press the Burst key.

2. Press F1 (N Cycle).


3. Press F4 (Period).
d

4. The Period parameter will become highlighted
in the Waveform Display area.

GW Instek MFG-2000 Series Specifications

General

Brand	GW Instek
Model	MFG-2000 Series
Category	Inverter
Language	English