HEIDENHAIN iTNC 530 HSCI Service Manual

21 – 360 HEIDENHAIN Service Manual iTNC 530 HSCI
21.2.9 Corrective action
Mechanics If you have found that the fault is due to the mechanics of the machine tool:
 Replace mechanical components. --> Ask your machine tool builder.
Drive
components
If you have found that the analog servo amplifier or the motor is defective:
 Replace the drive component. --> Ask the respective manufacturer.
Control
components
If you have found that the CMA-H 04-04-00 is defective:
 Replace the CMA-H 04-04-00.

HEIDENHAIN iTNC 530 HSCI Specifications

General

Brand	HEIDENHAIN
Model	iTNC 530 HSCI
Category	Control Systems
Language	English