144 Chapter 4 Fax EN
Case I: Shared voice/fax line with answering machine
If you receive both voice calls and fax calls at the same phone number, and you also have an answering
machine that answers voice calls at this phone number, set up the printer as described in this section.
Figure 4-12 Back view of the printer
1 Telephone wall jack.
2
Use a minimum 26 AWG phone cord to connect to the
port on the printer.
You might need to connect the phone cord to your country/region adapter.
3 Answering machine.
4 Telephone (optional).
To set up the printer with a shared voice/fax line with answering machine
1. Remove the white plug from the port labeled
on the back of the printer.
2. Unplug your answering machine from the telephone wall jack, and connect it to the port labeled
on
the back of the printer.
NOTE: If you do not connect your answering machine directly to the printer, fax tones from a sending
fax machine might be recorded on your answering machine, and you might not receive faxes with the
printer.
3. Connect one end of the phone cord to your telephone wall jack, then connect the other end to the port
labeled
on the back of the printer.
NOTE: You might need to connect the phone cord to your country/region adapter.
To Next Page
Loading...
Need help?
General