32 Chapter 1 Get started EN
Load an original on the scanner glass
You can copy, scan, or fax originals by loading them on the scanner glass.
NOTE
: The scanner might not work correctly if the scanner glass and lid backing are not clean. For more
information, see Maintain the printer.
NOTE
: Remove all originals from the document feeder tray before lifting the lid on the printer.
To load an original on the scanner glass
1. Lift the scanner lid.
2. Load your original print-side down and align it with the marking on the rear left corner of the glass.
TIP: For more help on loading an original, refer to the engraved guides along the edge of the scanner
glass.
3. Close the lid.