EN 73Scan
Scan
You can scan documents, photos, and other paper types, and send them to a variety of destinations, such as a
computer or an email recipient.
When scanning documents with the Ricoh Printer Assistant software, you can scan to a format that can be
searched and edited.
When scanning a borderless original, use the scanner glass and not the document feeder.
NOTE
: Some scan functions are only available after you have installed the Ricoh Printer Assistant software.
TIP: If you have problems scanning documents, see Copy and scan issues.
• Scan to a computer
• Scan to a memory device
• Scan to email
• Scan using Webscan
• Create a new scan shortcut (Windows)
• Change scan settings (Windows)
Scan to a computer
Before scanning to a computer, make sure you have already installed the Ricoh recommended printer software.
The printer and computer must be connected and turned on.
In addition, on Windows computers, the printer software must be running prior to scanning.
To scan an original to a computer from the printer control panel
Please make sure the printer has already connected to the computer before scanning.
1. Load your original print-side down on the scanner glass or print-side up in the document feeder.
2. Touch Scan from the control panel, and then select Computer.
3. Select your computer name.
4. Touch Start Scan.
To Next Page
Loading...
Need help?
General