72 Chapter 3 Copy and scan EN
Copy
To copy document or ID card
1. Make sure you have paper loaded in the input tray. For more information, see Load paper.
2. Place your original print-side down on the scanner glass or print-side up in the document feeder.
3. From the printer control panel display, touch Copy.
4. Select Document or ID Card.
5. Enter the number of copies by using the keypad or make changes to other settings.
TIP: To save your settings as defaults for future jobs, touch (Copy Settings), and then touch Save
Current Settings.
6. Touch
Copy.
TIP: By default, the printer is set to copy in color. If you want to copy in black-and-white, touch
(Copy Settings) to change the default color.
To copy default settings from the Embedded Web Server (EWS)
1. Open the Embedded Web Server (EWS). For more information, see Embedded Web Server.
2. Click the Copy tab.
3. Enter the PIN from the label on your printer, and click Submit.
NOTE: The PIN label can be found inside the front door.
4. In the Settings section, click Default Settings.
5. Change the settings and click Apply.
To Next Page
Loading...
Need help?
General