Roche Diagnostics
A-92
Operator’s Manual · Version 3.4
4Software Cedex Bio analyzer
Key screens
Tabs are used to group information into units that can be displayed on one screen.
The system administrator can define up to six test tabs, name them and assign tests,
profiles, and ratios to them.
The tests, profiles, and ratios are sorted alphabetically. Profiles and ratios precede the
tests, and they adopt the color of their tests.
You select an item by selecting its check box. You deselect an item by clearing its
check box.
The test is on board and ready for use.
The test has already been pipetted.
The test is blocked.
There are only few tests left.
A QC is due or its result has not been accepted.
A more recent version of the application has been imported.
The test is defined but not on board.
A required diluent or cleaner is not on board.
Display a screen that contains information on the status of each test.
STAT
f Overview > STAT
Press STAT to define urgent (short turn-around time) orders.
The process of defining a STAT (short turn around time) order is identical to that of
defining a routine order. The difference lies in the scheduling of the tasks. When a
STAT order is defined, it will be the next order to be processed, irrespective of what
routine orders already exist. Existing STAT orders are finished first.
Tests
Displaying the test overview
f Overview > Te st s
Tabs The tabs are displayed if you work with the order mode Full. They represent user-
defined test panels. If you work with the order mode Easy, all tests selected to be
displayed in mode Easy are on one panel and there are no tabs.
To Next Page
Loading...
Need help?
General
