Roche Diagnostics
B-126
Operator’s Manual · Version 3.4
6 Special operations Cedex Bio analyzer
Preparing a new disk
Preparing a new disk
Injury through reagents and other working solutions
Direct contact with reagents, cleaning solutions, or other working solutions may cause
personal injury.
When handling reagents, exercise the precautions required for handling laboratory
reagents, observe the cautions given in the Instructions for Use, and observe the informa-
tion given in the Safety Data Sheets available for Roche Diagnostics reagents and cleaning
solutions.
Infection by biohazardous materials
Contact with samples containing material of human origin may result in infection. All mate-
rials and mechanical components associated with samples of human origin are potentially
biohazardous.
o Be sure to wear protective equipment. Take extra care when working with protective
gloves; these can easily be pierced or cut, which can lead to infection.
o If any biohazardous material is spilled, wipe it up immediately and apply disinfectant.
o If waste solution contacts your skin, wash it off immediately with water and apply a dis-
infectant. Consult a physician.
Personal injury or damage to the analyzer due to contact with analyzer
mechanism
Contact with moving parts of the analyzer may cause personal injuries, stop the analyzer
from processing, and cause damage to analyzer parts.
o Do not touch moving parts during analyzer operation.
o Keep all covers closed, operate them as instructed on the screen.
Damage to the reagent disk
The reagent disk is designed to handle reagents while it is loaded on the analyzer. The
cover is equipped with a locking mechanism.
Remove or insert bottles only when the reagent disk is loaded on the analyzer and always
use the software functions to perform these tasks.
To Next Page
Loading...
Need help?
General
