Roche Diagnostics
Operator’s Manual · Version 3.4 B-45
Cedex Bio analyzer 5 Daily operation
Analyzing samples
8
Press the global action button to start processing.
e
See Starting the run on page B-48.
If you defined the order while the system was processing orders, new orders will
automatically be processed, without pressing .
Order of processing When you first start processing orders, the order of the sample placed on the leftmost
position on the sample area is processed first. The others follow in sequence from left
to right. Once processing is in progress, the orders are processed according to the
sequence in which they were defined.
Repeats and reruns of routine orders are performed before routine orders.
e
See Repeating tests on page B-61.
See Rerunning tests on page B-62.
Defining STAT orders
Short turn around time (STAT) orders are defined in the same way as routine orders.
a To define a STAT order
1
On the Overview tab, press STAT.
2
Continue as if defining a routine order.
e
See Defining routine orders on page B-42.
Order of processing When you have defined a STAT order and started the run, the system reacts as
follows:
o Existing STAT orders are finished first.
o Started tests of routine orders are finished.
o Repeats and reruns of STAT orders are treated as normal STAT orders. (The
order that was defined first will be performed first.)
o Repeats and reruns of routine orders are performed before routine orders.
Roche strongly recommends to always load extra cleaner when tests with extra wash
cycles are used.
If there is no space on the sample area
Remove any sample whose tube button is green .
To Next Page
Loading...
Need help?
General
