Roche Diagnostics
Operator’s Manual · Version 3.4 B-145
Cedex Bio analyzer 7 Configuration
Introduction
Introduction
The process for viewing and changing configuration and application values is the
same. The following procedures use the example of a calibration value.
Viewing values
a To view values
1
Choose Utilities > Applications > Laboratory Parameters.
2
Expand the list.
o Select a list item marked with .
o Press .
o Select a sublist item marked with .
o Press .
o Use the scrollbar, if required, to display the items you are interested in.
The definition items and their current values are displayed.
It is the users’ sole responsibility to determine whether they activate the TRL Check fea-
ture, and if they do so to define the lower measuring range in accordance with the country
specific requirements. If the users activate the TRL Check feature, they are also responsi-
ble for validation of the ranges they define.
e
See Calculation definitions on page B-165 and Installing applications on page B-147.
To Next Page
Loading...
Need help?
General
